Phone: +1 (763) 682-6096
Fax: +1 (763) 682-6197
303 12th Avenue South
Buffalo, MN 55313
Phone: +1 (763) 682-6096 · Fax: +1 (763) 682-6197 · 3303 12th Avenue South · Buffalo, MN 55313

RSGe Single Line Gas Filling Machine RSGe

$6,683.00 each

+

RSGe

Single line gas filler
One-hole filling capability
Two-hole filling; vertical fill or tilted > 10 degrees
Includes FDR gas sensor and computer control
Gas sensor meter for visual display of filling process
Gas flow shuts off automatically when IG unit is full
Flow Rate = 15-28 Liters per minute (dependant on exhaust size)
Time to fill = (2 hole filling) 71 seconds; (1 hole filling) 110 seconds.  *
Complete with filling lance, sniffler, bottle regulator, and hoses
Designed and manufactured in North America, serviced worldwide

 

 RSGe - Front Exterior View
 rsge_exterior_front.png
 Reference #  Description  FDR Part #
1 RSGe Name Plate 11414
2 Legend plate - power 10453
3 Hoyt Analog Meter, 0-4.9VDC, 60 on Center 11479
4 RSGe-1 Face plate 11410
5 Horn  5-8-F piezo alarm 11100
6 Handles, 8" 11158
7 FDR Sniffler logo 10630
8 Black Plastic  Fan Guard
11114
9 Mini Fan  115 vac
11115
10 Legend plate - FDR 10461
11 RSGh - Red - Push Button Legend 11491
12 Bulkhead Fitting - M12 x 1   
11103
13 Bulkhead Fitting - M10 x 1 
11104
 RSGe - Front Interior View
 rsge_interior_front.png
 Reference #  Description  FDR Part #
14 1/8" Male Elbow 11034
15 1/8" Female Tee 11013
16 1/4 x 1/8 Adaptor - Brass Pipe Fitting 11060
17 3/8" x 1/4" Male Connector 11009
18 Momentary Pushbutton Actuator, Green 11245
19 Gas Sensor Element, Orange Leads
10199
20 RSGe Name Plate 11414
21 3/8" x 3/8" Male Connector 11010
22 3/8 Run Tee with 7/16" Hole Drilled & Tapped 1/4 NPT 11062
23 8 Pin Octal Type Socket 11184
 RSGe - Back Exterior View
 rsge_exterior_back.png
 Reference #  Description  FDR Part #
24 RSG25 Back 10163
25 Insulation Grommets 11332
26 Fuse Holder  
11127
27 Mini Regulator, 1/4 npt Complete with Fittings 11167
28 3/8" x 3/8" Bulkhead Union 11012
29 1/4" x 1/4" Male Connector 11008
30 Cord Grip 11119
31 PLC 24 vdc Input/Output IP1612DC 11293
32 SPST  On-Off  Calibrate Switch Sensor O-Ride 11174
33 Din rail 1 1/4" for RSGz 11338
34 Argon Gas Sensor Board Assy, Rev 1.68.01A 10198
 RSGe - Back Interior View
 rsge_interior_back.png
 Reference #
 Description  FDR Part #
35 Fuse Holder 
11127
36 Power Supply 1.2 amp 24vdc (1&2) 11155
37 Solid state Relay 24 vdc/240 vac 10 amp 11194
38 1/10hp Vacuum Pump - Rotary Vane - 115v 11512
39 DN-M10 Mini Term Block PLC Direct Dinectors 11360
40 Muffler 11099
41 35 series (single) valve 24 vdc ILT 11208
42 Mini regulator, 1/4 npt   complete with fittings 11167
43 Pressure switch 11152
44 30" HG Steel Vacuum Gauge Model V500-30LM 11136
45 Vacuum Relief 11138
46 Omron Temperature Controller
11474
47 Vacuum switch 11151

 




* The "Time To Fill" that is listed for the individual machines is based on the following sized unit:

Unit Size:

Spacer:

     21/32” - 0.665” - 17mm
Height:
     48” - 1220mm
Width:
     24”- 610mm
Volume:
     767 cubic inches - 0.44 cubic feet - 12.6 liters
Area:
     8 square feet - 0.74 square meters

Note: There are a large number of variables when considering time to fill. The "Time To Fill" example is the result of filling an actual unit >90% using argon gas.