RSGh-2

RSGh - 2 

 

2 to 1 Option: $745 

Upgradeable to 2 additional lines ($2,420 per line)

One hole filling capability
Two hole filling; vertical fill or tilted > 10 degrees
Includes FDR gas sensor and computer control
Gas sensor meter for visual display of filling process
Gas flow shuts off automatically when IG unit is full
Flow Rate = 15-28 Liters per minute (dependant on exhaust hole size)
Time to fill = (2 hole filling) 71 seconds; (1 hole filling) 110 seconds.  *
Complete with filling lances, snifflers, bottle regulator, and hoses
Designed and manufactured in North America, serviced worldwide

 

RSGh - 2 Front Exterior View - Top
Reference #	Description	FDR Part #
1	RSGh legend	10529
2	Legend plate - power	10453
3	RSGd, RSGh Face Plate	10241
4	Hoyt Analog Meter, 0-4.9VDC, 60 on Center	11479
5	FDR Sniffler logo	10630
6	Horn  5-8-F piezo alarm	11100
7	Handles, 8"	11158
8	Maintained pushbutton actuator, green	11244
9	Momentary pushbutton actuator, green	11245
10	RSGh - Red - Push Button Legend	11491
11	RSGh - Blue - Push Button Legend	11492
12	RSGh - Green - Push Button Legend	11493
13	RSGh - Yellow - Push Button Legend	11494
14	Bulkhead Fitting - M12 x 1	11103
15	Bulkhead Fitting - M10 x 1	11104
16	Black Plastic  Fan Guard	11114
17	Legend plate - FDR	10461
RSGh - 2 Front Interior View - Top
Reference #	Description	FDR Part #
18	Mini Fan  115 vac	11115
19	Black Plastic  Fan Guard	11114
20	Gas Sensor manifold block	10240
21	Omron Temperature Controller	11474
22	Gas sensor support bracket	10042
23	8 Pin Octal Type Socket	11184
RSGh - 2 Back Interior View - Top
Reference #	Description	FDR Part #
24	Power Supply 2.4 amp 24vdc (3&4)	11156
25	DN-M10 Mini Term Block PLC Direct Dinectors	11360
26	DN-EB15 End Bracket	11361
27	1/2" x 1/8" bulkhead union	11058
28	Sheet metal - base plate	10246
RSGh - 2 Back Exterior View - Top
Reference #	Description	FDR Part #
29	Side Plate  Right Hand	11641
30	Insulation grommets	11332
31	Side Plate Left Hand	11640
32	Din rail  (Aluminum ) 3 1/2" for RSGd & h	11339
33	SPST  on-off  Calibrate Switch	11174
34	14 pin square flange	11106
35	9 pin square flange	11108
36	RSG25 Back	10163
37	PLC 24 vdc input/output IP1612DC	11293
38	1/2 stem elbow	11064
39	1/2" x 1/8" bulkhead union	11058
40	1/4" x 1/4" Bulkhead union	11011
RSGh - 2 Side Interior View - Top
Reference #	Description	FDR Part #
41	1/2 OD Hose x 1/2 NPTF Thread	11755
42	11128 Mnifold Drilled & Tapped	11441
43	3/8" x 1/4" male connector	11009
44	Vacuum switch	11151
45	3/8 x 1/8 Bushing (PC110B-62) B	11023
46	3/8 run Tee with 7/16" hole drilled & Tapped 1/4 NPT	11062
47	Vacuum Relief	11138
48	30" HG Steel Vacuum Gauge Model V500-30LM	11136
49	Hi-Flow, 24 vdc Mac valve, plain lead, 4 way 5 port	11206
50	1/4 x 1/8 Stem Adaptor	11759
51	1/4" x 1/8-27 barbed fitting (nylon)	10802
52	Type J Thermocouple	11146
53	DN-ECM10 End Cover	11362
54	DN-2JM10 Jumper 12 Pole	11363
55	3/8 OD Hose x 1/8 thread Pro-Fit Male Elbow Swivel	11754
56	1/4 OD Hose x 1/8 thread Pro-Fit Male Elbow Swivel	11752
57	2.1mm Muffler Orfice assembly complete	10554
58	1/4 OD Hose x 1/8 thread Pro-Fit Male Connector	11756
RSGh - 2 Interior Front View - Bottom
Reference #	Description	FDR Part #
1	3/8' x 2 Nipple	11033
2	Vac Pump 3/4 hp Gast	11218
3	RSGh Regulator Plate	11431
4	3/8" x 3/8" Male Connector	11010
5	Fuse Holder	11127
6	Mini Regulator, 1/4 npt   Complete with Fittings	11167
7	9 Pin Square Flange	11108
8	9 Pin Plug	11109
9	9 Pin Cord Clamp	11110
10	Cord Grip	11119
11	1/2" x 3/8" Male Connector	11055
12	3/8" Street Elbow	11036
13	3/8 Female Coupling	11019
14	3/4 H Motor Muffler	11425
RSGh - 2 Interior Back View - Bottom
Reference #	Description	FDR Part #
15	19" Rack Mount Case 12-Space	11342
16	Mini Regulator, 1/4 npt   Complete with Fittings	11167
17	1/4 OD Hose x 1/4 Thread Pro-Fit Male Elbow Swivel	11753
18	Vac Rack Support Rod	10834
19	RSG Vac Rail Left	10546
20	RSG Vac Rail Right	10547
21	Threaded Manifold	11128
22	1/4-18 npt Mini Plug (Polypropylene)	10818
23	1/4" x 1/4" Male Connector	11008
24	Solid State Relay 24 vdc / 120 vac 25 amp	11195
25	Pressure Switch	11152
26	1/8 x 3/8 Elbow	10815
27	DN-M10 Mini Term Block PLC Direct Dinectors	11360
28	DN-EB15 End Bracket	11361
29	DN-ECM10 End Cover	11362
30	DN-2JM10 Jumper 12 Pole	11363

 

 

 

 

* The "Time To Fill" that is listed for the individual machines is based on the following sized unit:

Unit Size:

Spacer:
     21/32” - 0.665” - 17mm
Height:
     48” - 1220mm
Width:
     24”- 610mm
Volume:
     767 cubic inches - 0.44 cubic feet - 12.6 liters
Area:
     8 square feet - 0.74 square meters

Note: There are a large number of variables when considering time to fill. The "Time To Fill" example is the result of filling an actual unit >90% using argon gas.